Ask most people about on-camera lighting options for their dslr, and the default response is usually a dedicated flash unit. And certainly the ttl capabilities of these units make them a natural. But over the last six months I have been exploring alternative on camera lighting options and have found myself genuinely excited over the new generation of LED continuous lighting options. They are small, don’t give off much heat, and what you see, is what you get. They also don’t give that obvious “flash” look image that can result with speedlights .
With the arrival of the Nikon d90 and the Canon 5d Mark II, both of which have hi def video capability, continuous supplemental light sources are going to grow in popularity as they can be used for both still and video capture. While there are several manufacturers who have led lighting available. I have been using the Litepanels Micro units. I found my units at the Calumet Photographic Store, here in NYC, but they are available at other major photo retailers as well.
What I like about the Litepanels Micro specifically, are the following:
- They are daylight balanced( about 5600k)
- They can be mounted in the hot shoe or off camera. They are a little over 3”x3”x1.5” in size and weigh about a quarter of a pound.
- No power tap compatibility issues.
- They are fully dimmable and flicker free! You can dial in your desired fill easily.
- There is an integrated filter holder and you get a tungsten conversion gel, as well as warming and diffusion gels in the kit.
- The run time using lithium batteries is about 7 hours.
- They can be run off ac with an optional adapter.
- They allow for quick location shooting without drawing the kind of attention that flash use often does.
While Litepanels doesn’t indicate the power rating, I suspect that at full power the micro is equivalent to about 25-30 watts. The 3”x3” panel configuration results in a pretty wide beam coverage area, and can impact scene illumination up to 10 to 12 or so, feet away.
If you are interested in continuous lighting options, such as LEDs for your still or hybrid (still and video capable) camera, make sure the unit is fully dimmable. You definitely want this level of control. Some products offer it while others do not. Try to buy a unit that has gels/filters available. If you do not buy one with gels, you should fashion them on your own.
For still and video work, the latest LED products are definitely worth exploring. As LEDS go, I have been extremely pleased with the performance of the Litepanels Micros.
Here are a few samples of images taken where one or two Litepanels Micro units:
Outdoors:
Two Litepanels Micros were mounted on a dual light head cross bar and oriented vertically to the right of the camera. A silver reflector was used camera left for additional fill.
Indoors:
A single Micro was placed above the camera and angled down towards model. The balance of the illumination in the scene is provided by one shaded lamp, camera left.
